Falcon Classic 110 Dual Fuel User's Manual And Installation Instructions - page 25

25

Australia

You will need the following equipment to complete the

cooker installation satisfactorily

GAS PRESSURE

TESTER

FLEXIBLE GAS HOSE

A suitable hose  and

restraining chain are

supplied with the cooker.

If a different hose is used

it must be in accordance

with the relevant

standards.

MULTIMETER

(for electrical checks)

You will also need the following tools:

1. Electric drill

2. Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3. Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4. Steel tape measure

5. Cross head screwdriver

6. Flat head screwdriver

7. Spirit level

8. Pencil

9. Adjustable spanner

10. Screws for fitting stability bracket

STABILITY BRACKET

If the cooker is to be

supplied with gas through

a flexible hose, a stability

bracket and reschain

must be fitted (both are

supplied with the cooker).