Intermec EasyCoder PF2i Installation Instructions - Note:
Other manuals for EasyCoder PF2i:
User Manual, User Manual, Install Manual, Installation Instructions Manual, Safety Instructions, Supplementary Manual, Installation Instructions Manual, Spare Parts, Install Manual, User Manual, Installation Instructions Manual, User Manual, User Manual, Installation instructions manual
Manual is about: Industrial
printers
of
4
2
CPU Board—Installation Instructions
Before starting to replace the CPU board, take precautions
against electrostatic discharges.
All EasyCoder PF2/4i, PX4/6i and PM4i printers
Replace the CPU board this way:
• Switch off the power.
• Remove the front/left-hand cover.
• Remove any optional interface boards.
• Disconnect all cables from the CPU board.
• Remove the four #T20 Torx screws and the hexagonal spacer that hold
the CPU board to the plate that covers the power supply unit.
• Lift out the CPU board and remove all SIMMs and any real time
clock.
• Fit the SIMMs and possibly the real-time clock on the new board and
install it in reverse order.
Note:
Refer to the Service Manual of each respective printer for
illustrations and instructions.