JabloCom EYE-02 User Manual - 3.7 Security Settings
JR_EYE-02.ENG.MAN.Manual.12.D
- 8 -
JabloTool also allows the user to block some of the reporting channels (calls
, SMS
, MMS
)
by checking-off the appropriate check-box in the contact line.
New contacts may also be added via an SMS command (see chapter 4.2, CONFIG commands).
To add a new contact by calling you can call the EYE-02 camera directly from a new phone number
while the camera is in the ENROLL mode.
If there are no phones saved in the contact list (after installing a new EYE-02 camera or after using the
factory reset function), the camera switches automatically to ENROLL mode and waits for an incoming
call.
Camera sends e-mails with the reply address noreply@jablocom.com. Please check your e-mail
client SPAM filter to accept e-mails from this address.
3.7 SECURITY SETTINGS
Camera is not protected by any password in the factory settings..
Camera process SMS messages or receive calls only from phone numbers stored in Contacts.
It is possible to setup two passwords.
Remote Access Password
This password is necessary for any access to your camera (SMS, JabloTool). If it is used, camera process
SMS messages which begins with the password from any phone number.
Configuration Password
This password is necessary for configuration changes excluding contacts.
For password setting or changing use JabloTool or configuration SMS (chapter 4.2).
Password can contain 4-31 characters, allowed symbols are 0..9, a..z, A..Z. Password is not
case sensitive.
Protect your camera by setting the Remote Access Password.
4. Camera Configuration
4.1 Set-Up and Configuration via PC
The most convenient way to set-up the EYE-02 camera and configure its parameters is by using PC and
the JabloTool software.
JabloTool DESKTOP is available as a software on installation CD included in the camera package.
JabloTool WEB server works remotely with the camera from www.jablotool.com.
Function of both JabloTool versions are the same, the only difference is in the method of connection
to the camera - JabloTool WEB requires a connection to the internet and establishes a cable-free
connection with the camera, JabloTool DESKTOP interconnects the camera with the PC by a USB cable.
The advantage of USB connection is faster data transfer from the camera.