JabloCom EYE-02 User Manual - 5. Other Features
JR_EYE-02.ENG.MAN.Manual.12.D
- 14 -
5. Other Features
5.1 Call Control
The EYE-02 camera provides a basic control function when it is called from a user’s phone. When a
phone saved in the contacts calls the EYE-02 camera, the camera answers the call and plays the basic
navigation menu:
Welcome to Camera menu:
To listen to the sound from the camera microphone ......................... press 1,
to receive an MMS with a current picture .......................................... press 2,
to receive an MMS with the last alarm record .................................. press 3,
to receive the latest events history in a text message ........................ press 4,
to switch the camera to the WATCH mode ......................................... press 7,
to switch the camera to the SLEEP mode ........................................... press 9.
The user can select a requested action by pushing the appropriate number key on his mobile phone.
5.2 Night View
The EYE-02 camera is equipped with a Night View function, which allows taking the infra-red spectrum
photos.
The EYE-02 camera has a built-in infrared LED lamp, which can illuminate the scene by non-visible
infrared light. Thought the human eye can’t see such light, the camera chip can collect a picture in this
spectrum.
The infra lamp illumination is activated automatically when picture taking is requested and the level of
ambient light is too low.
The night scene may be overexposed by IR lamp reflection from close located objects. In such
case the internal IR lamp should be disabled in camera configuration and an external IR lamp
should be used instead. For more information about IR illumination see application notes on
www.jablocom.com .
5.3 Monitoring
The EYE-02 camera can report all events from the system to the professional Alarm Receiving Centre -
ARC (also known as Central Monitoring Station).
Refer the picture “E” on the back cover page of this manual for understanding of EYE-02 communicati-
on with commercial Security agency ARC.
Reports are done in accordance with international standard communication protocols. Protocol set-
tings will be done by authorized ARC service provider once you subscribe to their service. For suppor-
ted protocols see application notes on www.jablocom.com .
5.4 Switching OFF and ON
To switch the EYE-02 camera OFF, switch it to the CONFIG mode (see chapt.3.3). Disconnect the
power and USB cables from the camera and press and hold the power button on the back panel for
3 seconds. When the green light on the front panel switches off, the camera shuts down.
To switch the EYE-02 camera ON, press and hold the power button on the back panel of the camera.
Keep holding the button until the green light on the front panel switches on. The start-up process has
started and you can release the button.
The camera also starts up automatically after it is connected to the AC adaptor or to PC by a USB cable.
Whenever the camera is expected to be switched off for a longer period of time or for transpor-
tation, it is strictly recommended to remove the backup battery from the EYE-02 camera.