JabloCom EYE-02 User Manual - 4.3 Event Reports
JR_EYE-02.ENG.MAN.Manual.12.D
- 11 -
COMMAND
DESCRIPTION
CONFIG LANG
Change the EYE-02 camera language settings.
Camera automatically changes the language according inserted SIM card. If the
language of the SIM card is not installed in the camera, English texts remains.
Example:
CONFIG LANG DEU
changes the default language to German.
Possible languages: ENG, DEU, SPA, FRA, FIN, SWE, NOR, SQI, ARA, CES, DAN,
ELL, HRV, HUN, ITA, NLD, POL, POR, RON, RUS, SLK, SWE, TUR.
For the list of currently installed languages in your camera send an SMS: HELP LANG
Example of the answer from the camera:
Camera EYE-02 help: LANG ENG, CES, DEU, SPA, FRA
CONFIG DELAY
Change the Exit delay timer setting,
Example:
CONFIG DELAY 25
sets the exit delay to 25 seconds
CONFIG POWER
Change of power mode,
Example:
CONFIG POWER BATTERY
changes power mode to BATTERY mode
CONFIG DATE
Set date and time in format YYYY-MM-DD HH:MM:SS.
Example:
CONFIG DATE 2009-10-24 08:34:02
CONFIG ACCESS
This command sets or changes the Remote Access Password.
Example:
CONFIG ACCESS 1234
for setting the password
Example:
1234 CONFIG ACCESS 4321
for changing the password
CONFIG PASSWORD
This command sets or changes the Configuration Password.
Example:
CONFIG PASSWORD 1234
for setting the password
Example:
Joana CONFIG PASSWORD Susie
for changing the password
When the camera is switched to other language than English, it still accepts English commands
as well.
4.3 Event Reports
Every event detected by the EYE-02 camera is recorded into the camera’s memory.
The event record consists of the date and time mark, detail description of the event including its source
and a video record.
Example of Events history viewed by the JabloTool software: