JabloCom EYE-02 User Manual - page 18
JR_EYE-02.ENG.MAN.Manual.12.D
- 16 -
When exploring the SD card, you will find the following folder structure:
HISTORY
This folder contains the files with complete (all details) log of event history. Files are
stored sequentially in format “ev00001.txt”.
PICTURE
Archive of static JPEG files recorded at ALARMs (For example: “p0065401.jpg”)
VIDEO
Archive of AVI video files records the ALARMs (For example: “vid01021.avi”)
config.txt
The file with the current configuration of EYE-02 – can be used for backup or restore of
configuration.
Camera keeps more than 10% of free space on the memory card. Automatically deletes old
files.
5.7 Reset to Factory Defaults
If necessary, the EYE-02 camera can be RESET to the factory default settings following this guide:
WARNING:
ALL USER SETTINGS, CONTACTS AND EVENTS WILL BE DELETED! MEMORY CARD
WILL BE FORMATED. EVENTS AN FILES DOWNLOADED INTO THE JABLOTOOL SOFTWARE REMAIN
IN PC.
• Switch the EYE-02 camera off (see 5.4)
• Press and hold the power button on the back side of the camera until it should be released accor-
ding to the following instructions
• Connect the AC power adaptor within the period of 10 seconds - camera starts to make short
beeps
• Wait until the camera makes 3 long beeps. Both LEDs (R+G) starts to flash at that moment, too.
• Release the power button now
• All settings including the enrolled external devices are erased from the EYE-02 camera. The camera
switches into the ENROLL mode and is awaiting a remote control enrollment and basic contact
settings.
5.8 External Wireless Devices
The EYE-02 camera has a built-in short range radio transceiver, which allows communication with
a wide range of professional security wireless devices from OASiS system produced by JABLOTRON
ALARMS (see www.jablotron.com).
This is a very simple way to extend your camera function to provide additional services such as:
• heating control by a mobile phone
• PANIC button function for elderly or disabled people.
Refer to the table on the inside back cover page of this manual for a brief review of available types of
wireless devices.
For enrolling a new device use JabloTool software (EYE-02/Configuration/External devices/Add new
device) or switch the camera to the ENROLL mode.
For installing all wireless components follow their manual.
• Remote controls / panic buttons: switch the camera to the ENROLL mode, press any button on the
remote control.
• Detectors: switch the camera to the ENROLL mode, insert the battery in to the detector.
• JA-80L Siren: switch the camera to the ENROLL mode, plug the siren to the wall socket.
• JA-80A Siren: switch the camera to the ENROLL mode, connect the battery in the siren socket.
• AC-82 Wireless relay: switch the camera to the ENROLL mode, follow the manual of AC-82. For
activating the transmitter of EYE-02 press the power button on the camera shortly.
Once the camera is enrolled into the wireless relay, you can choose function of the relay outputs.
Outputs can be managed by an SMS, can signal the mode of camera, etc. For settings go to JabloTool
EYE-02/Configuration/External devices/ Programmable outputs.
For more information about wireless devices see application notes on www.jablocom.com