JabloCom EYE-02 User Manual - 3.5 Profiles
JR_EYE-02.ENG.MAN.Manual.12.D
- 6 -
Glass-break detector (GBS)
Glass-break detector uses a digital signal analysis from the microphone and is able to detect a characte-
ristic sound of the breaking of a window up to 9 meters away.
The Door-Opening-Detection is a special type of detection which uses the acoustic signal filtering. It
allows detection of the infrasonic wave (pressure wave) caused by door or window opening.
GBS sensor can be used for indoor installations only.
Tilt and vibration detector (TILT)
Built-in tilt and vibration detector can detect a tampering or an unwanted manipulation of the camera.
Example: Stealing the camera body or changing camera position.
As vibration detectors are very sensitive, it should not be use for outdoor installation to prevent
the false alarms caused by the wind gusts. The vibration detector sensitivity reduction may be
necessary also for indoor installation with usual vibrations in some cases.
The detectors are optimized for application in rooms with maximum distance up-to 10 meters.
3.5 Profiles
The EYE-02 camera allows fast and simple setting of all necessary detector parameters by selecting one
of the pre-defined PROFILEs. These profiles are suitable for most camera applications. If necessary, the
profile may be further adjusted by the user.
HOME
HOME profile has been designed for camera installation inside a
building (house, flat, office). During WATCH mode, there are no
movements of people, no wind drafts, no significant temperatu-
re changes, or loud noises etc. expected.
OUTDOOR
OUTDOOR profile fits best camera installation outside your
home.
The camera significantly reduces its detectors’ sensitivity in
OUTDOOR as there are many possible sources which could
cause a false alarm triggering (sunshine, animals, street noise,
wind, etc.).
For outdoor installation see chapter 5.9.
GARAGE
This profile is suitable for installation inside your garage. It is
similar to the HOME profile. Additionally, the GARAGE profile
provides a 30-second entrance delay. It allows you to open the
garage or home entrance door first and switch the camera to
SLEEP during this delay.