JabloCom EYE-02 User Manual - page 11
JR_EYE-02.ENG.MAN.Manual.19.C-2A
- 11 -
U
se
r‘s
G
ui
de
EN
JabloTool WEB
JabloTool WEB is a service at
www.jablotool.com
.
User accessing its EYE-02 camera trough the JabloTool
WEB will be guided to establish the connection to the
camera. If the user is not registered or if the EYE-02
camera is not protected by a Remote Access Password,
the user will have to send a special SMS authorization
command from his mobile phone first to initiate the EYE-
02 camera connection to JabloTool.
S E R V E R
Internet
EYE-02 connection with JabloTool WEB
4.2 SMS C
Basic EYE-02 camera functions can be operated by text message (SMS) commands sent to the camera. Commands are
accepted only when sent from a mobile phone number stored in the contact list.
If the EYE-02 camera is protected by the Remote Access Password or the Configuration Password, each SMS must
be introduced with the appropriate password. Using the password the camera can be operated from any phone.
Please note passwords and commands are case insensitive.
Control commands
Control commands report or change the camera state.
COMMAND
DESCRIPTION
WATCH
Switches EYE-02 camera to the
WATCH
mode.
Example:
If the camera remote access is protected by the password MIKE, the command must be send as:
MIKE WATCH
Camera will confirm the message with a status SMS.
SLEEP
Switches EYE-02 camera to the
SLEEP
mode.
STATUS
EYE-02 camera will return an SMS indicating the current camera status.
Example of a response: Camera EYE-02 status: SLEEP mode, Time: 12/11/2009 13:56:31, SwitchX : Off, SwitchY: On
Camera EYE-02
Name of your camera
SLEEP mode
Current camera status
Time:12/11/2009 13:56:31
Time (date) of status report
SwitchX: Off
Indication that SwitchX is curretnly off.
SwitchY: On
Indicates that SwitchY is currently on.
The name SwitchX (SwitchY) can be changed to whatever you want need - see the table below.
PICTURE
The EYE-02 camera returns a multimedia message with a picture of the current scene in front of the
camera. The message also contains current camera status.
REPORT SMS
The EYE-02 camera sends a report of the 10 latest events. Camera sends up to 5 SMS.
REPORT MMS
EYE-02 camera sends an MMS with the last alarm event recorded in the camera history.
CREDIT
This command has been designed especially for the prepaid SIM cards. The EYE-02 camera will return
a text message with information about the current credit on your SIM card. This function is provided
by your network operator and might not work correctly on some networks.
After the first using of this command camera keeps the USSD part. It’s possible to send CREDIT
command only since then.
HELP
Camera returns a text message with a list of the SMS commands.
WEB
Command is for connecting the camera to the JabloTool server. The server describes detailed syntax
for the command.