JabloCom EYE-02 User Manual - page 12
JR_EYE-02.ENG.MAN.Manual.19.C-2A
- 12 -
EN
EN
U
se
r‘s
G
ui
de
COMMAND
DESCRIPTION
ON / OFF
DeviceX / DeviceY
If the camera is enrolled to a wireless relay, this command switches its programmable output. This
command works only if output is switched into sms on/off or pulse control mode.
Example:
Switches OFF DeviceX
Example: 1234 ON Sprinkler 100s
Switches ON „Sprinkler“ output for 100 seconds
Device names DeviceX/DeviceY can be renamed in Jablotool.
Possible Action is ON and OFF only. Output in pulse mode can be switched ON only.
Time parameter is optional. It can be 01:30:00 format or 1h 30m 0s.
CONFIG commands
CONFIG commands change the EYE-02 camera settings. Camera confirms configuration commands with an SMS.
COMMAND
DESCRIPTION
CONFIG PROFILE
Profile setting,
HOME
,
OUTDOOR
,
GARAGE
,
SHOP
or
CARE
Example:
CONFIG PROFILE SHOP
Camera switches to the profile
SHOP
Example:
Camera will switches to the profile
HOME
CONFIG CONTACT
Add a new contact.
Example:
CONFIG CONTACT MyEmail@domain.com
The e-mail address myemail@domain.com will be added to the EYE-02 camera contact list,
ALARM reports will be sent to this e-mail address including the video records.
Example:
The phone number +555888770551 will be added to the EYE-02 camera contact list. ALARMs
will be reported to this phone number in accordance with default settings via a voice call and
anMMS.
CONFIG LANG
Changes the EYE-02 camera language settings.
Camera sets the language according to the inserted SIM card automatically. If the SIM card
language is not installed in the camera, English texts remains.
Example:
CONFIG LANG GER
changes the default language to German.
Possible languages: ENG, GER, SPA, FRE, FIN, SWE, NOR, SQI, ARA, CZE, DAN, GRE, HRV,
HUN, ITA, DUT, POL, POR, RUM, RUS, SLK, SWE, TUR.
For the list of currently installed languages in your camera send an SMS: HELP LANG
Example of an answer from the camera:
Camera EYE-02 help: LANG ENG, CZE, GER, SPA, FRE
CONFIG DELAY
Changes the Exit delay timer setting,
Example:
CONFIG DELAY 25
sets the exit delay to 25 seconds
CONFIG POWER
Changes the power mode,
Example:
CONFIG POWER BATTERY
changes power mode to BATTERY mode
CONFIG DATE
Sets date and time in format YYYY-MM-DD HH:MM:SS.
Example:
CONFIG DATE 2009-10-24 08:34:02
CONFIG ACCESS
Sets or changes the Remote Access Password.
Example:
CONFIG ACCESS 5678
for setting the password
Example:
1234 CONFIG ACCESS 5555
for changing the password
CONFIG PASSWORD
Sets or changes the Configuration Password.
Example:
CONFIG PASSWORD 5678
for setting the password
Example:
5678 CONFIG PASSWORD 8888
for changing the password
When the camera is switched to other language than English, it still accepts English commands as well.
4.3 E R
Every event detected by the EYE-02 camera is recorded into the camera’s memory.
The event record consists of the date and time mark, detail description of the event including its source and a video
record.
Example of Events history viewed by the JabloTool software: