JabloCom EYE-02 User Manual - page 4
JR_EYE-02.ENG.MAN.Manual.19.C-2A
- 4 -
EN
EN
U
se
r‘s
G
ui
de
2. C I
Before installing the camera, ensure you have a SIM card provided by your GSM operator with an activate
EDGE/GPRS internet connection and MMS service.
Some SIM cards are protected by PIN code. It is necessary to disable the PIN code protection of the SIM card.
To do this, insert the SIM into your mobile phone and disable the PIN security code. If this is not observed,
the EYE-02 camera may not operate correctly.
2.1 P C
Unpack the camera and check the package contents. Please refer to the picture B on inside front cover of this manual.
1
EYE-02 camera
6
Screwdriver
2
Battery
7
Wall mounting screws
3
Remote control
8
User manual
4
Installation CD
9
AC adapter
5
USB cable
10
Connecting cable
Use only batteries, chargers and accessories approved by JABLOCOM for use with this particular model. The
use of any unapproved device may invalidate any approval or warranty, and may be dangerous.
2.2 I
For an extended graphic version of the installation procedure, see the Quick Guide manual.
Before inserting SIM card into camera make sure that:
- PIN protection is disabled
- MMS service is enabled
- Internet data access is enabled
• Insert SIM card and battery into camera
Unscrew and open the battery cover.
Insert the SIM card.
Insert battery and screw cover back.
• Install the camera to the selected position
Mark and drill-out fixing holes on a wall.
Mount the camera holder firmly.
Adjust the camera position.
Remove the lens protection.
• Connect camera to power source