JabloCom EYE-02 User Manual - page 8
JR_EYE-02.ENG.MAN.Manual.19.C-2A
- 8 -
EN
EN
U
se
r‘s
G
ui
de
3.5 D
The EYE-02 camera integrates a wide range of detectors. This sophisticated solution of combining various types of
detectors enables the user to protect the desired area from a wide range of threats. This chapter briefly describes
individual detector principles necessary for a correct setting of detection.
PIR motion detector (PIR)
PIR detector (Passive InfraRed sensor) or a Human Body Detector is the most common type of professional
security systems detectors. PIR can detect even very small changes of temperature differences in front of the
camera.
Motion-In-Picture detector (MIP)
The key principle of this detector is derived from a professional surveillance camera system. It analyzes the scene and
detects any change in the picture permanently.
A sophisticated digital algorithm provides an excellent resistance to false alarms caused by non-essential changes in
pictures (getting dark, switching on the street lamps, etc).
The user can simply mask-out (hide) a part of a picture in order not to detect changes in this part (mask of the street
traffic, etc.) and set the sensitivity according to the size and speed of change in the picture.
As the DSP method is energy demanding, MIP is usually activated after some alert from the PIR detector.
Glass-break detector (GBS)
Glass-break detector uses a digital signal analysis from the microphone and is able to detect a characteristic sound of the
window breaking up to 9 meters away.
The Door-Opening-Detection is a special type of the detection that uses the acoustic signal filtering. It allows detection of
the infrasonic wave (pressure wave) caused by a door or window opening.
GBS sensor can be used for indoor installations only.
Tilt and vibration detector (TILT)
Built-in tilt and vibration detector can detect a tampering or an unwanted manipulation of the camera.
Example: Stealing the camera body or changing camera position.
As vibration detectors are very sensitive, it should not be used for outdoor installation to prevent the false
alarms caused by the wind gusts. The vibration detector sensitivity reduction may be necessary also for
indoor installation with usual vibrations in some cases.
The detectors are optimized for application in rooms with a maximum distance up-to 10 meters.
Detector configuration
Each detector can be configured to 3 sensitivity levels and 3 levels of analysis.
Higher sensitivity settings mean that detector si activated more easily.
Example: Smaller movement or smaller vibration will be interpreted as activation.
Higher analysis level means that for activation more analysis has to be made before it is rated as activation.
Example: The movement or sound have to last longer or object (person) has to cross more detection zones etc..
3.6 R C
The EYE-02 camera can report events to mobile phones (via voice call
, text message
, MMS
) or to e-mail
addresses. Up to 10 different phone numbers and 10 e-mail addresses can be saved to the camera list.
Report levels
Each stored contact can have its own report level set. Three levels (Normal,
Extended, All Details) indicate how many events are
reported to the contact.
The extended level of reporting is assigned only to the first enrolled contact,
all additional contacts get normal level.
REPORT LEVELS
ALARMS
TROUBLES
STATUS
CHANGES
NORMAL
_
_
EXTENDED
_
ALL DETAILS
Report format
By default settings, camera sends alarm report as MMS and makes a call to all enrolled contacts. All other reports come
as SMS to the user.