KAL-FIRE ECO-prestige 105-59 Installation instructions manual - page 170
Manual is about: Balanced-flue gas system
Fairo(-hybrid) ECO-prestige
of
184
66
Error code Cause
Solution
15A
Incorrect ionisation
signal
Contact your installer.
08A
Lack of ionisation
detection during
ignition
If a flame is visible during ignition:
•
Check that there is no contact between the
ionisation rod (the || symbol on the burner)
and the Kal-Glow or the furnishings in the fire.
•
Check that the cable is correctly plugged into
the technical unit (see ‘ionisation’ in section
20: Wiring diagram).
If the error code still displays, contact your installer.
The ionisation cable may be damaged or
improperly connected to the ionisation rod.