KAL-FIRE ECO-prestige 105-59 Installation instructions manual - page 66
Manual is about: Balanced-flue gas system
Fairo(-hybrid) ECO-prestige
of
184
66
29. Installation of the iMatch interface (home automation system)
The iMatch interface (an option available at an additional cost) is delivered with 4 components.
1. Connect the cables as indicated in the image above.
2. Install the iMatch in the technical unit. Connect cable A to the burner control (HDIMS). See the circuit diagram below.
3. Disconnect the adaptor cable (24 V) from the burner control (HDIMS). Connect cable B to the burner control (HDIMS).
4. Connect cable C to the adaptator cable.
A red LED indicator should now light up on the iMatch interface.
only for Fairo ECO-prestige hybrid
C
B
A
B
C