KAL-FIRE ECO-prestige 105-59 Installation instructions manual - page 74
74
33.7
Choosing between thermostat mode and manual mode
1. Keep pressing the
P
button until the symbol or the
symbol begin to flash.
2. Press
P
again to select the symbol of your choice.
3. Press
to exit the menu.
4. In thermostat mode, the desired temperature can be adjusted using the
+
and
-
buttons.
The remote control measures the room temperature, allowing the strength of the fire to be adjusted
accordingly. To ensure an accurate temperature reading, make sure the remote control is outside of the
fire’s radiation range.
For security reasons the thermostat mode will be automatically switched off after 24 hours. New
activation is required.
If the fire is in thermostat mode when it is swiched off, for security reasons, after 24 hours it should be set to manual mode
manually or automatically when next switched on.