KAL-FIRE ECO-prestige 105-59 Installation instructions manual - page 64
64
27.3
Assembling the technical unit
Place the technical unit in an accessible place, preferably in a side wall of the mounting. Check the transmitting power before
definitively embedding the technical unit. A cover or steel casing can interfere with the transmitting power.
27.4
Controlling the signal with the remote control
1)
Press the
P
button until the time flashes on the top left of the display screen.
2)
Press the
right arrow button until ‘RFCK’ displays on the screen.
3)
Travel a circumference between 3 and 4 metres from the fire to measure the RFCK.
4)
‘RFCK 4’ indicates a correct and strong signal. ‘RFCK 1’ indicates a poor signal. A RFCK of 2 or 3 is
acceptable.
5)
Press the
button to confirm the signal and exit the menu.