KAL-FIRE ECO-prestige 105-59 Installation instructions manual - page 51
Manual is about: Balanced-flue gas system
Fairo(-hybrid) ECO-prestige
of
184
51
24.3
Adjusting the stone support
The appliance is supplied with a built-in frame of which the bottom can be used for a stone support. This support can be adjusted on
a continuum up to 30 mm. Loosen the nuts of the base of the frame and lower the frame to the desired height. The base support
indicates mounting positions for 20-mm and 30-mm bases (see below).
During the adjustment of the stone support, the mount for the glass panel on the left and the right of the appliance
cannot be removed. The Fairo ECO-prestige 75 (front model) does not have any mounts for the glass panel.
Mount for glass panel
Ensure at least 4 mm between the glass and the stone.
4 mm
4 mm