Karassn KS-200B Series User Manual - page 17
group is 18:00
(5) Set auto shutdown time of the second group
Enter into "Auto shutdown time of the second group" setup mode,
press "
˘ " or "˚ " key to adjust the auto shutdown time of the
second group. After the setup is finished, press "Reset" key to exit
or press "Function" key to set "Defense-activation or defense-
deactivation setup of defense area". The above figure shows that
the auto shutdown time of the second group is 18:00.
For example, if the check is time of a company is 8:00Am, and the
check out time is 12:00 and in the afternoon, the check in time is
14:00 and the check out time is 18:00, the time startup and shutdown
time should be set as follows:
The startup time of the first group is 12:00, the shutdown time of
first group is 14:00.
The startup time of the second group is 18:00, the shutdown time of
the second group is 8:00.
It is recommended to reserve some time for employees to check in
ahead of schedule and stop off after check out so not to cause
unnecessary alarms. If you want the alarm host to guard
continuously for 24 hours per day, set the same time for "auto
startup time" and "Auto shutdown time", e.g., "12:00". Usually, the
factory state is 24-hour continuous defense.
(6) Defense-activated or defense-deactivated setup of defense
area
To set defense-activated or defense-deactivated state of a defense
area, press "
˘" key to select the defense area number and press "˚"
Function 4
Defense area state setup
Hour
press
˘key to set
Minute
press
˚key to set
Function 4
shutdown time of the second group
Hour
press
˘key to set
Minute
press
˚key to set