Karassn KS-200B Series User Manual - page 8
"Function" key.
"Function" key, Press "Function" key to switch between
function setup options. They are totally eight function options. For
detailed function description, please refer to the related content of "
Operations" chapter.
"
˚ " key, is used to complete function setup together with
"Function" key.
"Reset" key. When an alarm occurs, press this key to stop the
alarm and the alarm message will automatically be saved to the
alarm record. When entering into setup state, press this key to exit.
In KS-200BMI alarm host, "Reset" key is clear button. Press this
key. The alarm voice will stop and stop to dial alarm telephone at the
same time. The alarm message will automatically saved to the alarm
record. When entering into setup state, press this key to exit.
Time display: usually, it is used to display clock and the second
light is flashing. When an alarm occurs, it is used to display alarm
time and the second light is completely on. When entering into setup
state, it is used to display setup contents and the second light is
completely on.
Location indication: usually, it is used to display clock seconds.
When there is an alarm, it is used to indicate alarm location (defense
area). When entering into setup state, it is used to display function
setup items.
Record speaker: This is just for KS-200BMI alarm host. Please
aim at speaker when you record.
2
3
4
5
6
7
.$5$6616(&85,7<3527(&7,21(/(&7521,&6&/7'
ࡳ㛑
ԡ
1
2
3
4
5
6
7
Front panel
,4#$PNQVUFS$POUSPMMFE8JSFMFTT"MBSN4ZTUFN
ORIENTATION
TIME