Karassn KS-200B Series User Manual - page 6
The advantage of this function is to come true the wireless relaying
emitter and decrease the system cost. For example, the users have to
install 10 detectors for one floor. Usually, It need to 10 KS-200ACT
detectors and 10-backup power for these detectors and AC power. If
the users use the wireless forwarding function, they just need 1 KS-
200ATI-C detector and 9 short-distance detectors (such as KS-
200DCT). It will decrease the system cost so much.
III. Precautions of Operation
1. Please carefully read the User Manual and pay more attention to
labels and directions on the user alarm host before operation. Check
whether the wiring connections are correct and then turn it on to test
so as to prevent the occurrence of accidents.
2. When the alarm host is not equipped with backup power supply
and self-propelled clock modules, the clock should be adjusted
again if a power failure occurs so as to avoid the incorrectness of the
clock.
3. The alarm host can be equipped with 12V 1.2Ah sealed-acid
storage cell. If the power failure often occurs in a defense area, the
batteries with a larger capacity are recommended to serve as the
emergency power.
4. Please don't disassemble the alarm host at will as not to cause
accidents and damage the apparatus.
5. If a failure occurs during operation, please contact with Karassn
client service department of Karassn agents with the warranty card
carried. Remember not to disassemble and repair by yourself.
6. Please periodically perform routine test so as to clear troubles in
time to avoid alarm omissions.
IV. Main Functions and Characteristics
KS-200BM system function introduction
1. The detector (wireless emitter) will automatically match codes
with the alarm host. And the system can be simply and easily
expanded.