Karassn KS-200B Series User Manual - page 20
change the telephone machine.
After press # # #, if there is a rapid sound "beep---beep---".
Usually, it is a wrong between the telephone machine and line
socket. And cause an open circuit alarm. Please connect again.
No operation within 20 seconds in the setup state, the system will
automatically exit.
All the following operations should be done in the setup state.
Press 0 # 0 # to exit, when it is finished.
(1) Telephone line short circuit, open circuit function setup.
Press 6# to start up the telephone line short circuit, open circuit
test.
Press 7 # to shut down the telephone line short circuit, open circuit
test.
Starting up the telephone test function, it will cause an alarm and set
out a rapid sound "beep---beep" when the telephone short circuit or
open circuit. It is recommended to start up this function.
(2) Password modification
Press 9 # A A A A A A # B B B B B B # B B B B B B #.
The "A A A A A A" is your old password, the original from the
factory is "0 0 0 0 0 0". "B B B B B B" is the new password. After
password is modified, the old password will be invalid. If you want
to program again you should enter the new password.
The users shall take care their password. If the password is lost,
please call the agent to ask help.
(3) Informed telephone number setup
Press 11# C C C C C C # to set the 1st group of informed telephone
number.
Press 12 # C C C C C C # to set the 2nd group of informed telephone
number.
Press 13 # C C C C C C # to set the 3rd group of informed telephone
number.
Press 14 # C C C C C C # to set the 4th group of informed telephone
number.
Press 15 # C C C C C C # to set the 5th group of informed telephone