Karassn KS-200B Series User Manual - page 7
2. 1-100 independent wireless defense area can be defined and the
defense of each defense area can be activated or deactivated
independently. Common defense area and emergent defense area
can be defined at will.
3. The alarm host has two sets of timing switch on/off time and also
current on/off status indication.
4. There are three kinds of optional alarm sounds and four levels of
optional alarm volumes.
5. Ten pieces of up-to date alarm messages can scroll to display
simultaneously.
6. The 60 latest alarm messages can be inquired.
7. Optional emergency power supply, floating charge device and
low voltage alarm function
8. A set of normal open, a set of normal close and +12V DC output
are provided to control other devices (e. g., startup alarm horn,
alarm light, alarm linkage and etc.)
KS-200BMI system function introduction
Compatible with all KS-200B function, It also extended the
following functions:
1. Automatically dial 6 groups preset telephone and inform 2 groups
pagers.
2. With intelligent dial and receiving alarm distinguishable function.
Automatically distinguish telephone line state to improve dial
speech and stability.
3. Automatically preempt to dial alarm telephone.
4. With the dial pause function, can be compatible with exchange
system. 5. Can be record 10 seconds alarm voice, and automatically
play back pre-record voice and report alarm zone when alarm occurs.
6. Can startup/shut down the phone line in short circuit or open
short state warning function.
V. Name and Usage of Main Parts
1. KS-200BM alarm host
˘
key is used to complete function setup together with
"
"
1