Karassn KS-200B Series User Manual - page 18
key to select defense-activated state. "00" means that defense is
deactivated in the defense area and "01" means that defense is
activated in the defense area. It should be noted that, no matter the
defense area is common defense area or emergent defense area, all
the alarm signal won't be received if a defense area is deactivated by
the alarm host.
The default factory state is that all defense areas are activated.
It is recommended to recover the defense state in time when a
defense is deactivated so as not to omit any alarm.
(7). Alarm record query
Enter into "alarm record query" mode, press "
˘ " key to display
alarm record number and alarm area, press "
˘" key to display alarm
time, If there is no alarm record, "------" will be displayed.
Press "
˘" to display Press "˚" to display
Then, press "
˚" to display the record number and the alarm area of
previous alarm record. Continuously press "
˚" to display the alarm
time of the previous alarm record.
(8) Alarm sound and alarm volume setup
Enter into function 8 to set alarm sound and alarm volume. In
function 8 setup, press "
˘" to select an alarm sound and press "˚"
to select an alarm volume. There are three types of alarm sounds.
"01" is 110 police car warning tone, "02" is 120 ambulance warming
tone and "03" is 119 fire wagon sound. And there are four levels of
alarm volumes, which increase from "00" to "03".
3. KS-200BMI alarm host program operation
Alarm time
Hour
Alarm time
Minute
Function 7
alarm record Query
location
Alarm record
Alarm
Number
Function 7
alarm record Query
Function 8
set alarm sound and alarm volume
alarm tone selection
press
˘key to set
alarm sound volume
press
˚key to set