Karassn KS-200B Series User Manual - page 23
("at XX garden" is recorded by the users at 30# for 10 seconds. For
details, please refer to "Record Operation"). Then you will hear an
indicative sound "beep". The system will take 20 seconds to wait the
command. If the alarm voice is not clear, press 5# to replay. After an
indicative sound "beep", press 2 # to clean the alarm on your
receiving phone or mobile phone. After the alarm host is clean the
alarm, it will shutdown the alarm sound and can't dial the informed
telephone number. If there is no operation within 20 seconds, the
alarm host will hang up the line and continuously dial other
informed telephone number.
Note:
If press 2# to clean the alarm, the alarm host can't dial any
informed telephone number.
If there is no operation within 20 seconds, the alarm host will
hang up the line and continuously dial other informed telephone
number.
IX. Main Technical Specification
1. KS-200B series alarm host
Radio receiving sensitivity: 0.2 V (12dB signal-to noise ratio)
Working Voltage: AC 220V 15% 50Hz, DC 12V-13.8V
Working current: standby current 75mA,
Alarm Current 350mA.
o
Working environment: -10 C--50
,
Alarm Loudness: 100 dB within 1m
2. Wireless Passive Infrared Detector
Working Voltage: AC 220V 15% 50Hz, DC 12V-13.8V Working
current:: standby current 10mA, Alarm Current 500mA.
Working environment:
,
o
Infrared detector distance:8-12m, 60 up and down,
o
110
right and left
o
C
o
o
-10 C--50 C