Kawasaki KX65 - Owner's Manual - page 119
118
j
Standard Carburetor Settings
Throttle Valve Cutaway
#1.5
Air Screw Opening
1 1/2
Pilot Jet
#25
Needle jet
O-0
Jet Needle
5GSP68–3
Jet Needle Clip Position
3
Main Jet
#190
•
Determine the altitude and temperature correction
factor.
EXAMPLE: At 1 000 meters (3 200 ft) altitude and
an air temperature of 35°C (95°F), the correction fac-
tor is 0.94 (see dotted line in the appropriate chart on
the previous page).
•
Select the correct pilot jet and main jet.
EXAMPLE: For a correction factor of 0.94, multiply
the jet size by that number.
Pilot Jet Size Selection for a Correction factor of
0.94
#25 × 0.94 = #22.5
Main Jet Size Selection for a Correction factor of
0.94
#190 x 0.94 = #180
•
Change the jet needle clip position, needle jet and
air screw opening according to the appropriate
chart on the previous page.
EXAMPLE: For a correction factor of 0.94, raise
the needle clip one position and turn out the air screw
one extra turn.
Jet Needle Clip and Air Screw Setting for a
Correction Factor of 0.94
3rd groove from top −1
Jet Needle Clip
gloove= 2nd groove
Air Screw
1 1/2 turns out +1 turn out =
2 1/2 turns out