Kawasaki KX65 - Owner's Manual - page 68
Other manuals for KX65 -:
Brochure, Service Manual
of
135
67
j
A. Pin
•
Tighten the cylinder nuts to the specified torque in
a crisscross pattern.
Cylinder Nut Tightening Torque
25 N·m (2.5 kgf·m, 18 ft·lb)
•
Scrape out any carbon and clean the cylinder
head with a high flash-point solvent.
•
Check for mineral deposits and rust in the cylinder
head water jacket, and remove them if necessary.
•
Replace the cylinder head gasket with a new one.
•
Install a new cylinder head gasket with the side
marked “UP” facing up toward exhaust side.
A. Cylinder Head Gasket
B. “UP” Mark
C. Exhaust Side
D. Cylinder Head
•
Tighten the cylinder head nuts to the specified
torque in a crisscross pattern.
Cylinder Head Nut Tightening Torque
25 N·m (2.5 kgf·m, 18 ft·lb)
•
Install the spark plug.
•
Connect the coolant hose to the cylinder head.