Kawasaki KX65 - Owner's Manual - page 50
49
j
Clutch
Clutch Lever Adjustment
Proper clutch lever play is 8
∼
13 mm (0.3
∼
0.5 in.).
Lever play increases with cable stretch and friction
plate wear, requiring periodic adjustment.
When the clutch lever play is out of specification,
first try adjusting it at the clutch lever as follows.
•
Slide the clutch lever dust cover back.
•
Loosen the locknut, turn the adjuster to obtain the
proper amount of clutch lever play, then tighten the
locknut.
A. Clutch Lever
B. Locknut
C. Adjuster
D. 8
∼
13 mm (0.3
∼
0.5 in.)
E. Dust Cover
•
Slide back the clutch lever dust cover.
If the clutch lever play cannot be adjusted at the
clutch lever, make the adjustment further down the
cable as follows.
•
Loosen the locknut at the clutch lever.
•
Turn the adjuster in all the way, then tighten the
locknut.
•
Loosen the nuts and turn them so that the clutch
lever play is 8
∼
13 mm (0.3
∼
0.5 in.).
A. Nuts
•
Tighten the nuts.
•
Start the engine, check that the clutch does not
slip and it releases properly.
•
Slide the dust cover back into place.