Kawasaki KX65 - Owner's Manual - page 69
68
j
•
When installing the carburetor, note the following:
•
Being careful not to bend or otherwise damage the
jet needle, align the groove in the throttle valve
with the guide pin in the carburetor body.
A. Groove
B. Guide Pin
•
Check that the throttle valve goes all the way down
into the carburetor body and slides smoothly.
•
Fit the ridge on the carburetor body into the notch
on the carburetor holder.
A. Ridge
B. Notch
•
Tighten the clamp screw on the air cleaner joint
and cylinder intake joint securely.
•
Install the exhaust pipe, gasket, and muffler.
•
Install the fuel tank, and tighten the fuel tank
mounting bolt.
•
Route the air vent hose and overflow hose through
the clamp on the crankcase.
NOTICE
Always keep the hoses free from obstruc-
tion, and make sure they do not get pinched
by the chain or shock absorber.