Kawasaki KX65 - Owner's Manual - page 91
90
j
Rebound Damping Adjuster Settings
A. Seated Position (Adjuster Turned Fully
Clockwise)
B. Punch Mark
Standard Rebound Damping Adjuster Setting
1 1/2 turns out*
*Out from the fully seated position
NOTE
○
The punch mark position of your rear shock ab-
sorber may be different from the illustration.
Spring Preload Adjustment
•
Set up the side stand as shown.
•
Remove the seat and both side covers.
•
Loosen the air intake duct clamp screw.
•
Remove the air cleaner case bolts.
•
Remove the rear frame and air cleaner case.
A. Rear Frame
B. Air Cleaner Case
C. Clamp
D. Air Intake Duct
E. Side Stand
F. Air Cleaner Case Bolts
•
Raise the rear wheel off the ground using a jack
(special tool).
•
Using the hook wrenches (special tools), loosen
the locknut and turn the adjusting nut as required.
Turning the adjusting nut down increases the
spring preload.