KEB COMBIVERT F6 Instructions For Use Manual - page 23
23
PrODUcT DeScrIPTION
2.3 Product features
This instruction manual describes the power circuits of the following devices:
Unit type:
Drive converter
Series:
COMBIVERT F6
Power range:
45...90 kW / 400 V
Housing size:
6
The COMBIVERT F6 is characterized by the following features:
• Operation of three-phase asynchronous motors and three-phase synchronous
motors, in operating modes open-loop or closed-loop with and without speed
feedback
• followingfieldbussystemsaresupported:EtherCAT,VARAN,PROFINET,POW-
ERLINK or CAN
• Comprehensive operating concept
• wide operating temperature range
• low switching losses by IGBT power unit
• low noise development due to high switching frequencies
• Different heat sink concepts:
• Air cooler mounted version
• Air cooler as through-mount version with IP20 degree of protection
• Air cooler as through-mount version with IP54 degree of protection
• Water cooler as mounted version
• Water cooler as through-mount version with IP20 degree of protection
• water cooler as through-mount version with IP54 degree of protection
• temperature-controlled fan, easily replaceable
• torque limits and s-curves are adjustable to protect gearboxes
• general protection functions of the COMBIVERT series against overcurrent, over-
voltage, ground fault and overtemperature
• Analog inputs and outputs, digital inputs and outputs, relay output (potential-free),
brake control and -supply, motor protection by I²t, KTY- or PTC input, two encod-
erinterfaces,diagnosticinterface,fieldbusinterface(dependingonthecontrol
board)
• integrated safety function according to