KEB COMBIVERT F6 Instructions For Use Manual - page 61
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
74
4.2.6.3 Wiring of an intrinsically safe braking resistor
X1A
R
-
+
Figure 26: Wiring of an intrinsically safe braking resistor
Intrinsically safe braking resisitors behave in error case
such as a safety fuse. They interrupt themselves without
firerisk.
More information about intrinsically safe braking resistors
=>
https://www.keb.de/fileadmin/media/Manuals/dr/ma_dr_safe-brak-
4.2.6.4 Using a non-intrinsically safe braking resistor
Using a non-intrinsically safe braking resistor with extend-
ed temperature monitoring
=>
https://www.keb.de/fileadmin/media/Manuals/dr/ma_dr_braking-re-
Chapter „Connection of a braking re-
sistor with extended temperature monitoring".
61
cONNecTION OF THe POWer UNIT