KEB COMBIVERT F6 Instructions For Use Manual - Attention
TA1
TA2
+
KTY84
KTY sensors are polarized semiconductors and must be operated in
forward direction! To this connect the anode to TA1 and the cathode
to TA2! Non-observance leads to incorrect measurements in the
upper temperature range. A protection of the motor winding is then
no longer guaranteed.
Figure 24: Connection of a KTY sensor
ATTENTION
No protection of the motor winding in case of wrong connection.
► Operate KTY sensors in forward direction.
► KTY sensors may not be combined with other detections.
NOTE
„Basic insulation“ against SELV voltage of the control. A system voltage (Phase – PE) of
300Visdefined.Consequently,theconnectedsensorsalsomusthavea„basicinsula-
tion“ to the mains potential (e.g. motor winding)!
More information about the wiring of the temperature monitoring and the brake
control are described in the respective control unit manual.
58
cONNecTION OF THe POWer UNIT