La Marzocco SWIFT EPSB User Manual - page 24

EN

24

12. Chute Clean-Out tool

Occasionally

the

chute

between the grinders and 

tamping

chamber

may

become clogged, causing 

thefuse

(resettable

or

replacable)totrip.Inaddition

to replacing or resetting

the fuse, it is important to 

remove the clogged grounds. 

On machines with serial 

numbers above 656, a chute 

clean-out tool is included. 

this tool is used to loosen 

compacted grounds and 

alleviate clogging.

(1)  

Clean out the hoppers 

and burr chambers as 

described on pages 13-15.

(2)  Remove tamper cover as 

described on p. 18.

(3) find the holes located on 

either side of the lower 

grounds chamber.

(4) insert the long end of the 

clean-out tool into the 

hole. Repeat on other 

side.

(5)  Reassemble machine.

WARNING

HAZARDOUS VOLTAGE 

DISCONNECT FROM POWER 

SUPPLY BEFORE SERVICING

Liftoffcover

insert tool into chute hole