La Marzocco SWIFT EPSB User Manual - page 7
EN
7
6. Operating the SWIFT EPSB
6.1 Swift EPSB
Once the portafilter is
engaged, press one of the
start buttons located at the
front of the Swift epSb.
The right and left buttons
correspond to the right and
leftbean hoppers. Coffee will
be ground, dosed, and tamped
from one of these locations,
depending on which button
you press.The red indicator
lights located above the
start buttons are illuminated
when the Swift epSb is
grinding and tamping. Once
the red light corresponding
to the button selected is no
longer illuminated, you may
remove the portafilter from
the Swift epSb and engage
it into the espresso machine.
the Swift epSb tamps the
coffee as it is ground. When
the volume of ground coffee
in the portafilter reaches
the set level, the grinding
motorturnsoff.Thetamping
motor continues to run for
1-3 seconds, “polishing” the
tampedcoffee.
6.2 Swift S/D
the Swift is now available in
a Single/Double dose version
which permits dosing and
tamping into specific filters
for either single or double
doses.
Selecttherightorleftbean
hopper.
Removepreparedportafilter.
SiNGLE L116/A/S
DOUBLE L115/A/S
Externallythismodelappears
likethestandardversion,but
the internal impeller, which
deposits and presses the
coffee,issmallerindiameter
so that it does not get stuck
insideasinglefilter.