La Marzocco SWIFT EPSB User Manual - page 31
EN
31
Change of grinding discs
1.Disconnect power supply
from the coffee machine,
stopbeanflowingintothe
grinder and if necessary
dismantle the grinder.
2. Release clamp [1] and
remove it.
3.Turnstationarydiscsflange
[3]anti-clockwiseandtake
itoff.
4. Unscrew the grinding discs
(3 screws [4]) from the
stationary- and rotary disc
flanges.Dohold/block the
rotarydiscflange[4a]with
aplastictool.
Cleaning
Use a brush to clean the
surfaces of the flanges.
Removeallcoffeeparticlesor
dust from the thread and than
lubraca-te it with slight film
(spray)ofPanolinTEFGREASE
H1, prod. 5975, food grade,
NSf listed; www.panolin.com
5. insert new grinding discs
on the cleaned rotary- /
stationarydiscflan-gesand
tightenscrewscarefully.
6. Re-install the statonary
disc flange [5] clock-wise
(avoid touching of the
grinding discs).
7.Connectpowersupply.
8. Calibrate grinder.
important: All surfaces of
the grinding discs as well as
theflangesmustbeproperly
cleaned in order to ensure a
perfect grinding.
16. Cleaning Procedure