La Marzocco SWIFT EPSB User Manual - page 32
EN
32
17. Recycling
1) De-commissioning and demolition
Start by setting the main switch to the
“0”orOFFposition.
Disconnecting from the power outlet
Disconnect the Swift epSb from the
electrical network by switching off the
associated circuit breaker or circuit
protection device. Remove the power
supplycordfromthepowerconnection.
At this point, the machine may be
removedfromthebar,beingverycareful
nottodropitorsquashyourfingers.
the machine is made out of various
materials and therefore, if you do not
intendtoputitbackinservice,itmust
be taken to a special disposal company
which will select the materials which can
berecycledanddiscardtheothers.
Current regulations make it illegal to
discard such machine by leaving it
on public grounds or on any private
property.
Recycling notice: Warning for the
protection of the environment.
Used electrical and electronic waste
contains hazardous but also valuable
and scarce materials which should be
recovered and recycled properly. We
kindly ask that you contribute to the
protection of the environment and
natural resources by delivering used
equipment to the relevant recycling
locationsifsuchlocationsareavailablein
yourcountry.