La Marzocco SWIFT EPSB User Manual - page 28
EN
28
Message Solution
Message
- Checkthattheelectricalplugisfullyinserted
- Switchtheon/offswitchtotheonposition(thelightshouldbelit)
*Checkfuses.
- Theportafilterisnotfullyengaged-Theportafilterisalreadyfull
- Thetamperisstuckinthefullorupposition(seetampercleaninginstructions)
- Thesafetytimerhasrunoutduetoandemptybeanhopper,closedbeangate,orapluggedbean
hopper chute.
*Safetymicro-switchfaulty
*Safetymicro-switchrodisnotcontactingtheswitchproperly.
- Checkthatthebeanhoppergateisfullyopen
- Grindcoarsenessmaybetoofine
- Checkpassagebelowbeanhopperforobstructions
*Adjustgrindtimereostat.
- Checkforblownfuse(seemanualunderfusereplacement)
- Ifagrindermotorfuseisblownreplaceitwitha10ampGDCfuse
- Beforestartingthegrindermotorremovethebeanhopper(seemanual)andensurethatthemotor
spinsfreely.Ifitdoesnotspinfreelyfollowtheburrchambercleaninginstructionsandlookforforeign
objects:nail,paperclip,rock,penny,etc.
- Presstheresetbuttonthatcorrespondswiththemotorthatdoesnotrun
- Iftheresetbuttonpopsoutagain,turnthegrindadjustknob4rotationsinthefasterpourdirection,
insert the clean out rod (see manual) remove the clean out rod, and restart the grinder.
- Iftheresetbuttonpopsoutagain,removethebeanhopper(seemanual)andensurethatthemotor
spinsfreely.Ifitdoesnotspinfreelyfollowtheburrchambercleaninginstructionsandlookforforeign
objects:nail,paperclip,rock,penny,etc.
- Donotattempttoresetthebreakermorethantwiceasthisactionmayoverheatanddamagethetriac
on the main power board.
*Swap the power leads between the two motors to troubleshoot motor and triac.
Adjustfinishheightofimpeller.
Adjustfinishheightofimpeller.
Change worn burrs.
PushstartbuttonsandNOTHINGhappens.
PushthestartbuttonandtheLIGHTSFLASH
GrindTIMEOUTisreachedbeforebasketisfull.
OneGRINDINGMOTORdoesnotrun
(serial numbers 0-655)
OneGRINDINGMOTORdoesnotrun
(serialnumbersafter656)
Shotgushesoutatfirstandthenslowsdown
Inconsistentshottimes
tROUBLESHOOtiNG GUiDE
(* items are for techs)