NAMCO PAC-MAN SWIRL Operation Manual - page 47
Troubleshooting
47
Test Mode
Periodic Inspection / Service
6. Maintenance
- Must be performed by a technician -
6-2 Service
6-2-1 BALL DETECTING SENSOR Cleaning
If an error (error code 011 or 012) frequently occurs, clean the BALL DETECTING SENSOR by following the
procedures below.
z
z
To avoid electric shock, accident or injury to yourself or others as well as damage to the electronic
circuitry, be sure to turn off the power switch before starting this task.
z
Do not use thinner, benzene, gasoline, alcohol or other organic solvents. This may
degrade the materials.
Turn the machine’s power OFF.
Remove the MAINT DOOR C on Station 2 (blue).
Loosen four pan head screws with washers (M4 x 6) to remove the GUARD F.
Blow off the dust and dirt on the BALL DETECTING SENSOR using a blower or air duster.
Station 2 (blue)
BALL DETECTING SENSOR