NAMCO PAC-MAN SWIRL Operation Manual - page 58
of
125
58
7. Troubleshooting
- Must be performed by a technician -
7-3 Disassembling/Replacement Procedure
7-3-1 DOOR SENSOR
Cabinet base assembly
DOOR SENSOR BRACKET
DOOR SENSOR
Pan head screw (M3 x 12)
Flange lock nut (M4)
Open the acrylic door.
Disconnect the harness connector and unscrew the two flange lock nuts (M4) to remove the
DOOR SENSOR BRACKET.
Unscrew the pan head screw (M3 x 12) to replace the DOOR SENSOR.