NAMCO PAC-MAN SWIRL Operation Manual - page 70
of
125
70
7. Troubleshooting
- Must be performed by a technician -
7-3-12 7-SEG LED PC BOARD (SMALL)
Field assembly
Truss head screw
(M4 x 6)
7-SEG LED
ACRYL
7-SEG LED PC BOARD
(SMALL)
Harness
connector
Truss head screw (M4 x 15)
Pan head screw (w/washers) (M3 x 6)
7-SEG LED CASE
Open the acrylic door.
Unscrew the two truss head screws (M4 x 6) to remove the 7-SEG LED ACRYL.
Unscrew the two truss head screws (M4 x 15) and disconnect the harness connector to remove
the 7-SEG LED CASE.
Unscrew the six pan head screws with washers (M3 x 6) to replace the 7-SEG LED PC BOARD
(SMALL).