NAMCO PAC-MAN SWIRL Operation Manual - page 62
of
125
62
7. Troubleshooting
- Must be performed by a technician -
7-3-5 LIFTING MOTOR/ LIFTING MOTOR DRIVE PC BOARD
Core assembly (ball lift)
Pan head screw
(M4 x 6)
Coupling hub
Set screw (M4 x 6)
LIFT BRACKET B
Coupling hub and slider
LIFTING MOTOR
Pan head screw (M5 x 12)
Station 4 (green)
Pan head screw
(M3 x 6)
LIFTING MOTOR
DRIVE PC BOARD
(w/red mark)
Coupling hub
Coupling the shafts
Coupling slider
Lifting motor
shaft
No clearance
gaps
No clearance
gaps
Coupling hub
Lifting motor shaft
Note
When securing the coupling hub,
make sure that the motor shaft end
aligns with the lower end of the
coupling hub as in the figure.