NAMCO PAC-MAN SWIRL Operation Manual - page 59
of
125
59
Test Mode
7. Troubleshooting
Troubleshooting
Disassembling/Replacement Procedure
- Must be performed by a technician -
7-3-2 MAIN PC BOARD
Cabinet base assembly
PC BOARD LID
Wing bolt
(M4 x 10)
Pan head screw (w/washers)
(M3 x 6)
Station 3 (red)
MAIN PC BOARD
Harness connector
Harness connector
Open the ticket door on Station 4 (green) to create workspace.
Remove the MAINT DOOR C on Station 3 (red) using the service key.
Unscrew the two wing bolts (M4 x 10) to remove the PC BOARD LID.
Unscrew the six pan head screws with washers (M3 x 6) and disconnect the seven harness
connectors to replace the MAIN PC BOARD.