Nautilus Quinton Owner's Manual - Heart Rate Priority

N

A

U

TI

LU

S

®

37

HEART RATE PRIORITY

H

EA

R

T R

A

TE

 M

O

N

IT

O

R

IN

G

The HR ClubTrack

®

 Plus offers telemetry (e.g., Polar) heart rate signal detection only (contact heart rate is not 

available).  Heart rate priority defaults to telemetry, unless HAND ONLY or BOTH HR OFF options are selected.  

Then, telemetry signals are locked out.  To detect a telemetry signal, select one of the following options:  

EITHER INPUT, LOCKED INPUTS, or TELEMETRY ONLY.

Locked/Non-Locked Heart Rate Signal Options

When the EITHER INPUT option is selected the heart rate source signal is not fi xed during the workout session 

1.  On the console keypad, press [SPEED UP], [3], 

[2].  At this point the screen will display HR 

INPUTS. Press [ENTER] to select this option. 

2.  There are fi ve options to handle heart rate input 

signals. Press the [SPEED UP] and [SPEED 

DOWN] keys to scroll through the options until 

you fi nd the option that you want.  Press the 

[ENTER] key to select that option.

  The options are as follows:

   LOCKED INPUTS  – allows either telemetry or 

contact heart rate signals to be detected. Once 

the console has detected a valid input signal it 

will lock out the opposite type of signal for the 

duration of the workout session. For example, 

if you start out using contact heart rate then 

you are limited to using only contact heart rate 

during your workout session, even if the signal 

is lost while performing the workout, and

vice-versa.

EITHER INPUT – allows either telemetry or 

contact heart rate signals to be detected. Does 

not lock out a particular input signal for the 

entire workout. This option will detect either 

input signal during a workout session, but only 

one at a time, and only until the other signal 

terminates.

  TELEMETRY ONLY  – locks out contact heart 

rate signals and will only detect telemetry 

signals.

   HAND ONLY  – locks out telemetry signals and 

will only detect contact heart rate signals.

   BOTH HR OFF  – turns off the ability to detect 

any heart rate signal. Used in rare situations 

where there is excessive interference with the 

heart rate signals.

•  During workouts where heart rate is  

necessary, such as the HR Zone Trainer and 

the Fitness Test, the console will pick up 

telemetry heart rate signals so that the 

programs are not disabled.