3-32 Chapter 3: BIOS Setup
Continuous POST
This option enables POST to repeat in a loop until cancelled by
pressing any key.
1. Move the cursor to Continuous POST and press Enter.
2. Select the desired setting from the drop-down menu.
Boot menu retry
Use this option to configure boot menu behavior.
1. Move the cursor to Boot menu retry and press Enter.
2. Select the desired setting from the drop-down menu.
•
Keyboard – User must press a key before POST will retry booting
from the devices in the boot menu.
•
Auto – POST will loop continuously through the boot menu
devices without user input.
LCD contrast and LCD Brightness (Advanced Menu)
To set the contrast and/or brightness, move the cursor to the
appropriate line item and press Enter.
Beep Error Codes (Advanced Menu)
The Beep Error Codes option enables/disables beep codes on error(s).
Move the cursor to Beep Error Codes, press Enter, and select On or Off.
Keyboard
Auto
Disabled
Enabled