of
153
Chapter 3: BIOS Setup 3-31
QuickBoot Mode
Enabling Quickboot Mode permits the system to skip certain tests
while booting. This decreases the time needed to boot the system.
1. Move the cursor to QuickBoot Mode and press Enter.
2. Select the desired setting from the drop-down menu.
After Power Failure
This option sets the mode of operation if an AC power loss occurs.
1. Move the cursor to After Power Failure and press Enter.
2. Select the desired setting from the drop-down menu.
• Enabled - Restores the previous power state before the loss
occurred.
• Disabled – Keeps the power off unitl the power button is pressed.
Disabled
Enabled
Disabled
Enabled