of
153
Chapter 3: BIOS Setup 3-21
SPP
ECP
378
278
Mode (LPT 2)
Use this option to set the mode for LPT 2.
1. Move the cursor to Mode and press Enter.
2. Select the desired setting from the drop-down menu.
Base I/O address (LPT 2)
This is used to set the base I/O address for LPT 2.
1. Move the cursor to Base I/O address and press Enter.
2. Select the desired setting from the drop-down menu.
Interrupt (LPT 2)
Use this option to set the Interrupt for LPT 2.
1. Move the cursor to the Interrupt option and press Enter.
2. Select the desired setting from the drop-down menu.
IRQ 5
IRQ 7
Disabled