of
153
3-16 Chapter 3: BIOS Setup
Disabled
Enabled
Auto
Powered Port (Serial Port B)
This option is used to set the mode of the serial power pin on the COM
port when +12v is present on pin 9.
1. Move the cursor to Powered Port and press Enter.
2. Select the desired setting from the drop-down menu.
•
Auto – Detect special cable and turn power on if present
•
On – Set the power on at all times
•
Off – Always leaves power off
LPT x
This option is used to configure Parallel Port (1/2).
1. Move the cursor to LPT x and press Enter.
2. Select the desired setting from the drop-down menu.
•
Disabled – No configuration
•
Enabled – User configuration
•
Auto – BIOS or OS chooses configuration
•
OS Controlled - displayed when controlled by OS
Auto
On
Off