NCR 7460 User Manual - Wall Mounting The Base Unit
Other manuals for 7460:
Manual
Manual is about: Retail Terminal
of
153
2-16 Chapter 2: Hardware Installation
Wall Mounting the Base Unit
To install a wall Mount on a flat vertical surface, use the 7460-K533
Wall Mount Bracket Kit .
1. Secure the Wall Plate to the wall with lag screws (4) into the studs
or with hardware of similar strength. The recommended viewing
height for the terminal is 1.2 m (48") from the floor.
18825
Wall Mount Adapter Plate
Wall Plate
Release Lever
2. Install the Wall Mount Adapter Plate to the bottom of the terminal
with screws (4) as illustrated.
3. Install the 7460 Terminal to the Wall Plate. The Wall Mount
Adapter Plate has locking tabs slots that mate on the Wall Plate.
4. Latch the Release Lever.