NCR 7460 User Manual - Operator Display
1-16 Chapter 1: Product Overview
Operator Display
18443
The 7460 is available with a 12.1" TFT (active matrix) 12.1" LCD.
LCD Adapter Board
The signals from the LCD header on the processor board are brought to
the LCD on a harness. Since there are multiple pin configurations and
connector types being used on the LCD, a small adapter board is used
to receive the LCD harness and map the signals into the correct pin-out
for the LCD panel. This board has a connector that plugs directly into
the LCD panel.
LCD Backlight Inverter Module
The backlight for the 7460 is contained on the LCD Adapter Board.
Touch Screen
The Touch Screen completely covers the LCD and is mounted directly
in front of the LCD, behind the front plastic bezel of the terminal. The
touch controller on the Processor Board supports resistive touch glass.
The touch glass has an integrated harness that is routed into the LCD
Board enclosure and is connected to a header on the LCD Board. The
touch glass has a glare-reducing texture that also helps hide
fingerprints.