of
153
Chapter 2: Hardware Installation 2-11
1. Place the Display Mount on the desired surface within 4 meters (13
feet) of the host terminal.
2. Determine if the cable should be routed down through the
mounting surface or if it should be run on top of the surface.
3. Secure the Mounting Plate with 4 screws provided.
16258
Mounting Plate
4 Holes
0.40 mm
(0.16 in.)
Diameter
76 mm
(3 in.)
4. Connect the 5972 Display Cable to the RS-232 Adapter Cable.
5. Connect the RS-232 Adapter Cable to a Serial port on the terminal.
Note:
Use the non-powered RS-232 ports if you are installing a
display that uses a power brick.
18480d
RS 232
COM 1
COM 2
COM 3
COM 4
POWERED
POWERED
POWERED