NCR 7460 User Manual - Recovery Procedures
Other manuals for 7460:
Manual
Manual is about: Retail Terminal
of
153
Chapter 5: BIOS Updating Procedures
5-5
Recovery Procedures
1. Connect the Parallel Dongle to the parallel connector on the
terminal.
19507
Parallel
Port
Com1
2. Connect the two machines with the RS-232 cable. Use COM Port 1
on both machines.
19508
NCR 7460
PC
RS-232 Cable
3. Boot the PC in the DOS mode with CD-ROM support.
Note:
The PC must be running in the DOS mode (not in a
Windows DOS box) for the software to operate correctly.
4. Insert the BIOS update CD into the PC.
NCR BIOS and BIOS Update Software
LPIN: A370-0022-0100